• Cabinet from canister

    Cabinet from the canister
    On sale you can find a variety of things made by skilled people from improvised means. For example, a very interesting idea - a canister, converted into a bar cabinet. It looks impressive and worth it. In this case, such a thing can be done on your own, so that it satisfies precisely your needs and demands. In bars, the door usually opens downwards, which may not always be convenient. Below is an instruction on how to make your own cupboard from a canister with shelves that are adjustable in height. The location of the shelves depends on the purpose for which the locker is intended, for example, the combination below is suitable for photographic equipment, but you can adjust it to fit your needs.

    Materials and equipment required

    You will need the following to work: Materials:
    • Old laundered or new canister.
    • Boards.
    • Hinges .
    • Handle.
    • Rubber gasket.
    • Screws, bolts and nuts.
    • Hardware:
      • Dremel with a cutting disc.
      • Cornergrinder with cutting disc (Bulgarian).
      • Band saw (or jigsaw).
      • File.
      • Marker, pen .
      • Corner ruler (optional, ruler will also work).
      • Sandpaper.
      • Planer.
      • Bench drill or drill and drill.

      Decide on door size

      Cabinet from the canisterCabinet from the canisterCabinet from the canisterCabinet from the canisterCabinet from the canister
      Before you start cutting the door in the canister, it is worth deciding what size it should be. With the help of a marker attached to the square, you can map the doors of different sizes and choose the most suitable. In the example above, it is 30 mm from the edge of the canister. In order not to accidentally erase the line drawn by the marker, you can glue it with a translucent adhesive tape and draw a thinner line along the top that can be more convenient to cut.

      Cut the door

      Cabinet from the canisterCabinet from the canisterCabinet from the canisterCabinet from the canisterCabinet from the canisterCabinet from the canister
      The door can be cut out with the help of a Dremel or a Bulgarian. The second option may turn out to be faster, while the Bulgarian leaves a wider slit, since she has a wider drive. Since it is planned to glue a rubber seal on the door and edges of the opening, this will be a more suitable option. When working with a grinder, you will most likely need help to fix the canister. At the final stage, it is more convenient to use a Dremel to cut out rounded corners. When cutting metal, you must be very careful with sharp edges on the cut. Use gloves and file the edges with a file.

      Rubber seals on the door and fit to size

      Cabinet from the canisterCabinet from the canisterCabinet from the canisterCabinet from the canister
      Glue the rubber seal to the edge of the door and check if the door is snug.If necessary, cut and adjust the corners with a Dremel and a file.

      Determine the size and location of the shelves inside the canister

      Cabinet from the canisterCabinet from the canisterCabinet from the canister
      Now you need to make internal shelves for the cabinet. Depending on what you plan to store in it, think over its design. The picture shows a layout suitable for photographic equipment, while the entire structure can be further disassembled and remodeled, since the assembly uses a locking connection. The internal dimensions of the canister may vary slightly depending on the manufacturer, so you better start from your own measurements . To simulate the end result and imagine how everything will look, you can use a design program like Autodesk Inventor.

      Making shelves

      Cabinet from the canisterCabinet from the canisterCabinet from the canisterCabinet from the canisterCabinet from the canisterCabinet from the canisterCabinet from the canisterCabinet from the canisterCabinet from the canisterCabinet from the canisterCabinet from the canister
      First of all, polish the boards. In this case, the boards turned out to be 12 mm thick. Then, using the templates, put on the boards the marking of the parts for the shelves. To cut them, it is best to use a band saw. Since this canister has a notch in the middle along the narrow side, in the shelf it was necessary to cut a hole with the help of a drilling machine. Drill also through the hole for connection with the support posts in each corner, at a distance of 6 mm from the edges with a width of 3 mm and a depth of 8 mm. When fastening a shelf with a clip, place a piece of wood between the clip and the shelf itself so as not to damage it. To accurately fit all the details to each other and to the dimensions of the canister, you will need to carefully polish the edges and junctions.Remember that sanding is best along wood fibers. Finally, you need to cut up vertical stands. To connect with the shelves using dowels, make holes at the ends of the posts 12 mm deep, 3 mm in diameter (then the mount should be 20 mm long).

      Prepare and install the door

      Cabinet from the canisterCabinet from the canisterCabinet from the canisterCabinet from the canister
      Choose the appropriate loops for the design. After measuring the width of the hinges and determining where you want to attach them, make a mark using a nail or something else sharp. One of the options: hinges at a distance of 15 mm from the edge of the canister, at a height of 100 and 270 mm. Not to be mistaken with the location of the hole, start drilling using a thin drill, preferably 1 or 2 mm in diameter, and then install a thicker one. that matches the purchased bolts. Install the hinges and trim the gasket if necessary. It is now easy to determine the location of the holes in the door by attaching the door and placing it in the desired position.Drill holes on the door as described above, and fasten the hinges on it. Last in order, but not in the important matter: secure the door handle to the desired location. In this case it is set 45 mm from the edge and 180 mm from the bottom edge of the door.

      Assembly of shelves

      Cabinet from the canisterCabinet from the canisterCabinet from the canisterCabinet from the canister
    Finally you need to assemble the shelves for the cabinet. It will be easy or difficult depending on how sophisticated the design you have come up with.

    Fill the locker and enjoy

    Cabinet from the canisterCabinet from the canisterCabinet from the canisterLocker from the canister Find out where you will store the amazing locker. The most important, of course, is finding a place where he will be in the public eye, and you can proudly demonstrate to everyone the creation of your hands.

    Related news


    What is useful shrimp
    How to flash Nokia 5230
    What are generics and should we be afraid of them
    Where is Tolyatti
    How to increase memory stick
    How to cook pork liver tasty and easy
    Interesting historical series of 2015