• How to connect the receiver Tricolor?

    Watch the video

    How to connect the receiver Tricolor?

    If you can not connect the usual cable TV, people install satellite TV. One of the best companies providing this service is Tricolor.

    However, in order for your television to show satellite television, you need a receiver. But not everyone knows how to properly connect the receiver from the company Tricolor and how to configure it.

    Connection receiver Tricolor

    Connection of the receiver can be divided conditionally into three options:

    • Connect via analog high frequency connector.
    • Connection via analog low-frequency connectors.
    • Connection via other outputs.

    All three options have their pros and cons. Consider each separately.

    Connect via analog high frequency connector

    This is the easiest way to connect. It only needs one antenna cable, which is inserted into the LNB OUT on the receiver, and into the LNB IN on the TV. However, this connection option is the worst option of allbecause the quality of pictures, images and sound will be very low, at the level of conventional television of the past generation.

    After connecting, it remains only to find TV channels through auto search.

    Connection via analog low-frequency connectors

    These connectors include three:

    • Scart connector It is connected using a special SCART cable, which is inserted into the correct connector in the receiver and on the TV. At the same time, the picture quality will be slightly better than the analog high-frequency connector.
    • RCA connector. Or in our "tulips". This is the easiest and most affordable way to connect. It is only necessary to insert tulips into the connectors of the desired color in the receiver and in the TV. Tulips divide the signal into three - the image, the left and right audio channel. Thanks to this, the picture and sound on the TV will be of higher quality. In the settings of the TV, you must select the desired input.
    • YPbPr connector. These are the same tulips, but they are connected to the sockets labeled �component videoout�. These connectors are not always present on the receiver and on the TV. But if they are, then the quality of the picture and sound will be higher than when connected via the RCA connector.In the settings of the TV also need to select the desired input.

    These connectors outperform analog high-frequency connectors in terms of quality, but lose out on the high-quality connectors in the next section.

    Connection via other high-quality connectors

    High quality connectors include:

    • S-video connector. To connect to this connector, you need an S-Video cable, which you can buy at any hardware store. It is inserted into the desired connector in the receiver and TV. The quality of the S-Video connector is slightly better than the YPbPr-type connector, but the difference is very difficult to notice. The advantage of this connector is that it is on any receiver, unlike the YPbPr-type connector. However, it transmits only the image, and for transmitting high-quality sound an additional input is used additionally.
    • SPDIF output. Used to transmit high-quality sound to home theater speakers or to a TV. To connect using optical cable SPDIF. Often, video is transmitted via an S-Video cable, and audio via an SPDIF cable.
    • HDMI connector. The best way to date to transmit audio and video to television. It has the best quality of image and sound transmission.To transfer using an HDMI cable that connects to the correct connectors on the TV and receiver. However, the cable is quite expensive.

    After installing the receiver, you need to set up the TV in order to receive the video and audio signal correctly.

    Setting the receiver Tricolor

    After connecting to the TV through the wires of the receiver, you need to insert a smart card into the receiver's socket and plug it into the network. When you first start you need to configure the receiver correctly:

    1. In the TV switch to the desired input.
    2. In the receiver's menu, select the language and region in which we are located.
    3. Then the receiver will automatically start searching for TV channels Tricolor television. It will take some time. After which you can watch TV channels.

    During setup in the receiver's menu, you can also alter the list of TV channels at your discretion into certain groups.


    Related news


    The guy and his favorite dog are very similar to each other. Charming portraits of two friends
    Baked Garlic Bread
    How to get hydrogen
    A Patchwork Dog
    Non-alcoholic mulled wine
    How to get out of a love triangle
    DIY lamp painting
    How to cook in the microwave