How to make a hookah?
The culture of smoking hookah came to us from the East and very quickly gained popularity not only among young people, but also among the older generation. Unlike smoking cigarettes, smoking hookah is not addictive, and tobacco with different flavors allows you to relax and have a good time.
There are many places where you can smoke hookah. This is all sorts of bars, cafes and restaurants, even non-eastern orientation, clubs and nightlife. But sometimes in order to smoke a hookah, there is no desire to leave the house. For such cases, you can not only buy, but also independently make a hookah from scrap materials. Fortunately, instructions on how to make a hookah with your own hands, quite a lot. It is easy, convenient, and most importantly - cheap.
Hookah from the kettle
At home, you can try to make a hookah from the kettle and sanitary supplies.
It is necessary to start making hookah from a flask, the main component of the hookah. It makes no sense to buy a flask, instead you can find an old kettle for brewing tea.Now you need to decide what will be made of the mine for the supply of smoke. It is better that it was not plastic, but metal. That is why a hook from the shower is perfect for the hookah. The new one is quite inexpensive, and if you use the old one, it must be thoroughly washed from the sediment of water that has gathered on the inner walls.
Next, understanding how to make a hookah, you need to think about its top. The top of the hookah, where you will put coal and tobacco, can also be made from scrap materials. To do this, you need a burner from an old gas stove (similar to a cone), a steel strainer for the sink and a pipe 30 cm long. The diameter of the pipe must be chosen so that it fits into the lower hole of the burner.
All preparations are made, now you only need to assemble the structure Having understood how to make a homemade hookah, you should start assembly from the mine. If you connect the burner and the metal tube is not difficult (it is necessary to hammer in a good hammer), then attach the other end of the shaft to the lid of the kettle is somewhat more difficult. To do this, you need to drill a hole in the lid of the kettle according to the diameter of the tube, insert the tube and solder the structure on both sides, then clean the spike to a smooth state.It is also important to consider the degree of deepening of the tube in the kettle. It would be ideal to deepen the tube before the opening of the spout of the kettle.
Now you need to attach the hose to the spout of the kettle. To do this, the grinder needs to slightly trim the nose, drive the inside plastic part of the hose into the nose and fix it well. The metal part of the hose is put on the spout of the kettle.
Now it remains to finish the little things: seal the connection between the kettle and the lid with foil, and put a watering can for the tobacco in the gas burner. You need to put a metal strainer on the hob on top - the hookah is ready! Subsequently, homemade hookah can be decorated. At first it is necessary to toned all parts in one color, and then apply the drawing. You will get a real exclusive hookah!
Hookah from a bottle
You can also try to figure out how to make a hookah from a bottle. This is probably the cheapest way to make a hookah, since for this you need to have only a 1.5- or 2-liter bottle, as well as two tubes (you can take the former markers). It is important to remember that the main thing in the whole structure is tightness.
One of the tubes should be bent at a right angle, make a hole in the bottle cap, put the bent tube in there and fix it (you can solder). The second tube is soldered at a height of about 10 cm from the bottom of the lid. Hookah from a bottle ready to use!
How to make an envelope
Fresh juices: good or bad
What to see at night
What is sauce
Knee pain: causes and treatment of folk remedies
The Magical Meaning of Orchids in Your Home
How to delete history in Mozile