• Making wooden rug

    One of the garden decorations that is often found in landscape design is a wooden chaise, which is also often used as a stand for flowerpots. If you have the necessary tools, you can do it yourself. To work, you will need:
    • Jigsaw;
    • Electroplanes;
    • Grinder;
    • Drill or screwdriver;
    • Drill and screws;
    • Clamps;
    • PVA glue;
    • Square, pencil, compass;
    • Paint brush;
    • Sandpaper;
    • Varnish, stain;
    • Wood.
    The first stage of work is the assembly of the lower part of the chaise. To produce it, you need a beam of 50x50 mm. You need to tie together three beams, two of which will be 30 cm long and the third 35 cm. The bar 35 cm long must be on top, as the wheels will be attached to it later. However, please note that the second timber must be cut in the middle, so that it can be inserted into another timber 50x50 cm. You need two units of such details. The length of the chaise will be 120 cm.Use a jigsaw to cut this size bar. Then thread this 120 cm rail into the two parts that you made. As an attachment, use PVA glue, and additionally fasten the structure with screws. Before you tighten the screw, drill a hole for it. This will allow you to avoid chipping wood.
    Making wooden briches
    Making a wooden chaise
    Then you can start assembling the top of the bricks. To do this, you will need a board with a thickness of 10–20 cm. You need to prepare two boards of 120x15 cm and two boards of 120x20 cm. It is not necessary to choose a clean forest of the first grade. On the contrary, it is very beautiful to use wood with knots, chips that look natural. This will add aesthetics to your product. In addition, you can artificially use the jigsaw to trim the edges of these boards, which also give an appearance "under the old days".
    Making wooden bricks
    You also need to make two details in the form of a trapezoid. The first trapezoid to be in the back of the chaise should be 30 cm high.To do this, take a board 40x30 cm. If there is no such, then you can glue the two boards together to get the required size. Next, draw on this board a trapeze upper part, which should be 30 cm, and the lower one 40 cm. The second trapezoid should be lower. To do this, take a 40x25 cm board. Then draw a trapezoid on it, which will be 40 cm below, and 30 cm above.
    Making wooden briches
    Making wooden briches
    Making wooden rugs
    Then you can proceed to the assembly of the cart. Attach to the trapezium on both sides of the board, which were previously harvested. The bottom of the chaise is also necessary to type the board. At assembly use self-tapping screws and PVA glue. On the other side of the chaise where the trapezium is attached lower, attach a 40 cm long board that will be the seat of the chaise.
    Making wooden briches
    Making wooden rugs
    Now you canstart making wheels. Two cart wheels will have a diameter of 25 cm, and two more wheels will have a diameter of 35 cm. To make a wheel, you will need a 50 cm thick cutting board. The wider the board, the better. Take a compass and draw a circle with a diameter of 35 cm on the board. Then, draw a circle with a diameter of 30 cm from the same point. Then cut the wheel you drew on the board with a jigsaw. The inner part of the big wheel is 10 cm in diameter. It must also be cut out from a 50 cm thick board. Next you need to drill 8 holes in the wheel rim with a diameter of 15 mm. That is the diameter of the needles. After that, pass the needles into the wheels, and fasten them with white glue. Small wheels are made in the same way. A circle with a diameter of 25 cm is drawn on the board with a compass, and a circle with a diameter of 20 cm is drawn from the same point. The inner circle will be 10 cm in diameter. If you do not have a board 35 or 25 cm thick, then you can glue two boards together. To do this, it is necessary to treat both sides on the planer, then thoroughly lubricate them with PVA glue, and fasten with clamps.
    Making wooden briches
    Making a wooden rug
    Then the wheels are attached to the bottom of the cart, to a timber that has 5 cm protrusions. You can fasten the wheels with long screws or a bolt.
    Making wooden briches
    Making wooden briches
    Making wooden briches
    Making wooden briches
    Making a wooden rug
    Now you can polish the product in order to prepare it for painting. After the cart is fully assembled, it must be opened with a stain. You can choose the color of the stain to your liking. However, lighter tones are perfectly combined with the green color of the lawn and greenery. Next you need to process the cart well with varnish or linseed oil. It is better to use high-quality varnish, which will protect the wood well from moisture, as this decoration will be on the street.
    Making wooden briches
    Making wooden briches
    Making wooden briches
    Manufacturing of a wooden rug
    Such a product will bring a highlight to the design of your summer cottage, and will perfectly decorate it. You can pleasantly surprise your guests with this unique and exclusive decoration. As a rule, the chaise is used as a stand for flowers.

    Related news


    How to grow gloxinia
    How is a bicycle useful?
    Why flies Fifa 12
    A large table of plastic pipes
    What is a double
    How to choose an inexpensive mattress